Ignition pump,DHB ignition pump

Summary

Overview: ignition pump is widely used in boiler burner ignition, diesel ignition; Diesel ignition pump pressure up to 4MPA, flow range from 0.6-10 cubic/hour. DHB ignition pump/ignition pump is suitable for boiler combustion, mixing aspha

Detail Introduction

Overview: ignition pump is widely used in boiler burner ignition, diesel ignition; Diesel ignition pump pressure up to 4MPA, flow range from 0.6-10 cubic/hour.

DHB ignition pump/ignition pump is suitable for boiler combustion, mixing asphalt, all kinds of burner ignition. The highest pressure can be up to 4Mpa, the transmission temperature is not more than 200℃, the viscosity of 5×10-6~10-3m2/s(5~ 1500cST) with various lubricating media. Such as heavy oil, crude oil, industrial light oil, diesel and so on. If the transmission of corrosive, fiber containing media, to be noted when ordering. Ignition pump adopts special materials and technology, improve the strength and wear resistance of gear, widely applicable, can replace the imported ignition pump.

Diesel ignition pump selection parameters table:

型号 Model	额定流量		排出压力MPa	必需气蚀余量mH20(m)	效率 %	电动机			吸入及排出管口径
型号 Model	m³/h	L/min	排出压力MPa	必需气蚀余量mH20(m)	效率 %	功率	转速	型号	吸入及排出管口径
DHB1/3.6	1	18	3.6	9.0	58	2.2	1420	Y100L₁-4	G3/4"
DHB2/3.6	2	35	3.6	9.0	58	3	1420	Y100L₂-4	G1"
DHB3/3.6	3	50	3.6	9.0	59	4	1440	Y112M-4	G1"
DHB5/3.6	4	68	3.6	9.0	59	5.5	1440	Y132S-4	G1¹/₄"
DHB5/3.6	5	83.3	3.6	9.0	63	5.5	960	Y132M-6	G1¹/₂"
DHB7.5/3.6	7.5	125	3.6	9.0	63	7.5	1440	Y132M-4	G1¹/₂"
DHB8/3.6	8	165	3.6	9.0	63	11	960	Y160L-6	G2"
DHB12/3.6	12	180	3.6	9.0	63	15	1460	Y160L-6	G2"