Hot oil gear pump

Summary

Model: KCG Hot oil gear pump is mainly composed of gear, pump body, pump cover, high temperature seal and other components, similar to YCB gear pump, temperature range between 10-280 degrees, can be used to transport thermal oil, is a chea

Detail Introduction

Model: KCG

Hot oil gear pump is mainly composed of gear, pump body, pump cover, high temperature seal and other components, similar to YCB gear pump, temperature range between 10-280 degrees, can be used to transport thermal oil, is a cheap and long service life of high temperature oil pump. It is the preferred pump for conveying residual oil, hot oil and coal tar. 1, high temperature oil pump is mainly composed of pump body, pump cover, gear, shaft, bearing, and sealing parts.

2, three body for cast iron, cast steel; Gears and shafts are made of special steel with surface hardness up to HRC60 and strong wear resistance.

Scope of application:

This series of hot oil gear pump is suitable for conveying liquid with lubricity, temperature between 10-280 degrees, flow rate between 0.6-60 cubic/hour, viscosity between 10-1500CST. If the temperature is high or corrosive, our factory can customize special pumps to meet customer needs. This pump is not suitable for conveying corrosive, containing hard particles or fiber, highly volatile or low flash point liquid, such as gasoline, stupid, etc. (the above situation can choose diesel oil pump).

In the oil transmission system can be used as transmission, booster pump;

In the fuel system can be used for conveying, pressurizing, injection fuel pump;

It can be used as lubricating oil pump in all industrial fields.

Hot oil gear performance parameters table:

型号 Model	流量Flow Capacity		压力Mpa	吸入高度m	口径 mm	电机功率 kw
型号 Model	m³/h	L/min	压力Mpa	吸入高度m	口径 mm	电机功率 kw
2CG-1	1	16.7	1.0 /1.6	5	Φ25	1.5
2CG-1.5	1.5	25	1.0/1.6	5	Φ25	1.5/2.2
2CG-2	2	33.3	1.0/1.6	5	Φ25	2.2/3
2CG-3	3	50	1.0/1.6	5	Φ25	3
2CG-5	5	83.3	1.0/1.6	5	Φ40	4
2CG-6	6	100	1.0/1.6	5	Φ40	4
2CG-7.5	7.5	125	1.0/1.6	5	Φ50	5.5
2CG-10	10	167	1.0/1.6	5	Φ50	5.5/7.5
2CG-12	12	200	1.0/1.6	5	Φ55	5.5/7.5
2CG-15	15	250	1.0/1.6	5	Φ55	7.5 /11
2CG-18	18	300	1.0/1.6	5	Φ55	7.5/11
2CG-18	18	300	1.0	4.5	Φ70	7.5
2CG-29	29	483.3	1.0	4.5	Φ70	11
2CG-38	38	633	1.0	4	Φ100	22
2CG-58	58	960	1.0	3.5	Φ100	30
2CG-72	72	1200	0.6	4	Φ150	37
2CG-96	96	1600	0.6	4	Φ150	45
2CG-112	112	1800	0.6	2.5	Φ200	55
2CG-150	150	2500	0.6	2.5	Φ200	75