(1) Side plate wear: the gap between the side plate of the gear oil pump and the end face of the gear is very small, such as improper use, the side plate will appear scratch, wear and burn phenomenon. (2) Insufficient oil absorption: its r

Because in recent years, the country exports YCB gear pump with nearly $1 billion a year, in the fine, heavy, simple YCB gear pump accounted for a minority, because from the start of reducing the export position, this kind of low-grade YCB

一、 YCB20/0.6齿轮油泵 主动轴与衬套磨损后的修复 由于出油腔比进油腔压力高，在其压力差作用下，齿顶与泵壳的进油腔附近接触较多，因此泵壳内腔在此处磨损较多，使内腔与齿顶间隙增大。 泵壳内腔与轮齿磨损后，对泵油量影响很大。当轴与衬套或轴孔磨损严重

KCB960齿轮泵流量58立方/小时，厂家：泊头市海纳油泵有限公司。KCB960齿轮泵可以配18.5KW和22KW两种电机，主要用于输送温度低于120度的油品，如果温度较高则需选择KCB960高温齿轮泵。

Oil pump can not work alone, it must be integrated with the pipeline, generator to work. Oil pump, pipeline and motor constitute the main process of the pump station. Therefore, to correctly design and manage the pump station not only need

In the process of using gear oil pump , the most common situation is the phenomenon of mechanical seal oil leakage, the following is to introduce its reasons and solutions: A. Leakage through the end face of the rotating ring and the stati

Berth gear oil pump models are more, the most widely and most common models are KCB, 2CY, YCB, NYP, FX, CYZ, etc., different types of gear oil pump uses different use effect is also different. Here are some explanations. KCB gear pump can

YCB齿轮泵,YCB油泵,YCB输油泵内部结构同KCB齿轮泵大致相同，只是齿轮的开关不同而已，YCB齿轮输油泵采用圆弧齿轮设计而成，噪音低无困液是YCB齿轮泵,YCB油泵,YCB输油泵最大的特点。流量在0.6-80立方/小时之间可供选择。

KCB/2CY型齿轮输油泵主要用于输送具有润滑性的油品，例如：润滑油、食用油、柴油、汽油等。该泵靠所输送的介质进行泵内零部件的润滑，最大流量在300立方/小时，口径在20-200mm。